04/30/21 - KDT

LFSD_1536_OverDrive_Boot_Flash_Rev0_1MB_043021.mcs contains:

Master_1536_OverDrive_wBootRev0_1MB_102720.bit (FPGA ID 0x0A260300) and
Slave_1536_OverDrive_Ver_01_Rev_07_070820.bit (FPGA ID 0x00A60107)

I changed the I2C Temperature comparisons to occur in te Microblaze clock domain (100MHz)
versus the LFSD Clocks Domain (250MHz) as we were witnessing bits not switching
synchronously - causing a 1 LFSD_clk misread which triggered a Over Temp Error
which results in power-down the OpAmp board.

Note: this now matches the changes I made previously to the 768 Stored-Image OverDrive 
design on 04/26/21.

--

Note: the Bootloader loads from Flash Rev "0", but with an additional 1MB offset.

The Applcation is:

Master_Gen3_OverDrive_Flash_Rev0_1MB_App_092920.mcs

which STILL need to be programmed to Revision "0".

I plan on modifying the App to check the value in the CoverGlass DAC - if 0x000 or
0xFFF set to 0x6A0, but I want to get this firmware uploaded for testing.